Doug’s MATLAB Video Tutorials

January 11th, 2008

Advanced MATLAB: Capturing data from an instrument

 In an earlier post, I covered how to collect data from a data acquisition board. [click here] This post will do something similar for an oscilloscope. This time instead of using the Data Acquisition Toolbox we will be using the Instrument Control Toolbox. If you are connecting to hardware for capturing data and then bringing that data into MATLAB later for post test analysis, you should really consider bringing the data into MATLAB directly so you can do your analysis as the test is running.
Find the files here. PodCast here Other videos have been gathered here: http://blogs.mathworks.com/pick/category/video/ Other Advanced MATLAB posts have been gathered here: http://blogs.mathworks.com/pick/category/advanced-matlab/

By Doug Hull

14:05 UTC | Posted in Format: PodCast, Format: Video, Level: Advanced | Permalink |

You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Wrap code fragments inside <pre> tags, like this:

<pre class="code">
a = magic(3);
sum(a)
</pre>

If you have a "<" character in your code, either follow it with a space or replace it with "&lt;" (including the semicolon).

About

Doug Hull is a proud MathWorker who is on a mission to help you with MATLAB.

Doug's picture

Subscribe


Blog Admin

These postings are the author's and don't necessarily represent the opinions of The MathWorks.