Guy on Simulink

Simulink & Model-Based Design

Sample Time Offset

I noticed that many users are not aware that it is possible to specify sample time offsets in Simulink.

Scalar Sample Time

In this simple model, I have specified the sample time of the Constant and the Discrete Integrator to 0.1s and the sample time of the Rate Transition block to 1s. This means that the Gain block will execute at time 0s, 1s, 2s, 3s, ...

Model with 2 rates

Sample Time Vector

What if I want the Gain block to execute at 0.4s, 1.4s, 2.4s, 3.4s, ... ?

As described in documentation section How to Specify the Sample Time, you can specify a sample time vector in the form [Ts, To] where Ts is the sample time and To is the initial time offset.

To apply an offset, I configure the Rate Transition:

Configuring the Rate Transition to have an offset

and the model now gives a different result. We now see that the Gain executes at a sample time of 1s, but with an offset of 0.4:

Sample Time Offset

Now it's your turn

Do you use sample time offset in your model? Leave us a comment here.

|
  • print

댓글

댓글을 남기려면 링크 를 클릭하여 MathWorks 계정에 로그인하거나 계정을 새로 만드십시오.