Startup Shorts: Engineering a New Class of Aircraft with Model-Based Design
Building a new aircraft is not only about proving that it can fly. The systems behind it also have to work together reliably as the aircraft moves from prototype to real-world operation.
That is the challenge for BluJ Aero. The India-based startup is developing electric vertical takeoff and landing (eVTOL) aircraft for passenger and cargo mobility, with a focus on faster regional connectivity. The team sees an opportunity to connect routes where traditional transportation infrastructure can be expensive, time-consuming, or difficult to scale.
“The world around us has ever-increasing demands for faster connectivity,” says Utham Kumar, Co-founder and CTO at BluJ Aero. “Traditional modes of transport, like high-speed rail or airports, are great to build, but the costs are expensive and they take a lot of time to build. So, we need a new mode of transport that can solve this.” Building that new mode of transport brings its own engineering challenges. BluJ Aero is working in an emerging field where many of those answers are still being developed.
Engineering Without a Ready-Made Playbook
Unlike more mature areas of mobility, eVTOL development does not offer a long list of proven references to compare against. Aircraft systems must meet demanding requirements for weight, power density, and reliability, while also working together as an integrated platform.
“We are one of the very few in the world building [eVTOL],” explains Kumar. “There are no ready-made solutions against which you can compare and evaluate your own designs. It is up to you to develop, test, and validate your designs.” For BluJ Aero, that means developing and testing several core aircraft systems in-house rather than relying entirely on off-the-shelf solutions.
Working as a startup adds another challenge. “I think one of the main challenges that we have had is the expertise of the people,” shares Pranay Rebala, Vice President of Product and Engineering at BluJ Aero. “As a startup, we had a very lean team.” The team needed a way to move quickly between design, simulation, and hardware testing without having to build every layer of the development process from scratch.
Moving Faster with Model-Based Design
To support this development approach, BluJ Aero uses Model-Based Design with MATLAB and Simulink to develop and evaluate systems in simulation before moving further into hardware. “Our effort is always to iterate quickly, run simulations, avoid building expensive hardware, and conduct evaluation and development in simulation software,” explains Kumar. “We extensively use software that enables this, such as MathWorks, where we set up our models. This allows us to scale as our systems grow in complexity or size.”
That workflow became particularly important as the team moved from evaluation hardware and reference designs toward its own custom propulsion hardware.
From Motor Control to a Working Prototype
One example of this approach is BluJ Aero’s work on its motor controller. The team began by using Motor Control Blockset and C2000 Microcontroller Blockset with an evaluation board to develop and validate its motor control algorithms. With basic tuning, the evaluation setup allowed the team to spin a motor and build its understanding of the firmware and hardware requirements before moving toward its final application. It then applied the same Model-Based Design approach as it moved to custom hardware.
BluJ Aero was able to run the motors within two weeks of hardware bring-up. Getting the motors running was an important milestone, but it was only one step in the development process. As the team continued developing its sensorless field-oriented control (FOC) approach, testing revealed challenges involving sensorless transitions, observer performance, Iq oscillations, and current sensing. Addressing them required repeated rounds of simulation, debugging, testing, and hardware changes.
With Model-Based Design, the team diagnosed control-algorithm issues from hardware limitations by comparing simulated and measured behavior. When Iq oscillations appeared at higher RPM, this model-to-hardware analysis pointed to the current-sensing path, leading to improved sensing and, ultimately, a redesigned controller board.
For BluJ Aero’s lean engineering team, Model-Based Design also enabled them to begin working with the hardware without waiting for every foundational layer to be built from scratch. “I think the biggest value this adds to a zero-to-one approach is that you do not have to wait for a firmware engineer to build all the base-level drivers and layers, which, for new hardware, would typically take months,” adds Rebala. “The controls engineer, empowered with MATLAB, can quickly figure things out by moving between simulation and the hardware.”
Scaling the Approach Across the Aircraft
The motor-controller work continues as BluJ Aero scales its propulsion architecture. After developing sensorless FOC for a 48V motor and validating it under load, the next phase focuses on motor parameter estimation and sensorless operation for a 400V propulsion system.
The motor controller is one part of BluJ Aero’s broader engineering roadmap. As the aircraft moves closer to commercialization, the team plans to extend the same approach to other critical systems, including the battery management system and flight controller. BluJ Aero also sees Model-Based Design playing a role in qualification testing, Hardware-in-the-Loop testing, and future certification workflows. By considering certification requirements earlier in the design process, the team aims to reduce the risk of time-consuming changes later in development.
As BluJ Aero continues developing the aircraft, the focus remains on turning that engineering work into something that can fly. “At BluJ, we pride ourselves on being able to build and fly aircraft,” says Kumar.
Hear more from Utham Kumar and Pranay Rebala of BluJ Aero:
Learn more about BluJ Aero: https://blujaero.com/
Learn more about MathWorks Startup Program: https://www.mathworks.com/products/startups.html


コメント
コメントを残すには、ここ をクリックして MathWorks アカウントにサインインするか新しい MathWorks アカウントを作成します。