- Multiple Inputs and Outputs
- Custom loss functions
- Weight sharing
- Automatic Differentiation
- Special visualizations during training
- Define Network Layers
- Specify Training Options
- Train Network
Load the data
[XTrain,YTrain] = digitTrain4DArrayData; [XTest, YTest] = digitTest4DArrayData; classes = categories(YTrain); numClasses = numel(classes);
1. Define Network LayersCreate a network, consisting of a simple series of layers.
layers = [ imageInputLayer([28 28 1]) convolution2dLayer(5,20,'Padding','same') batchNormalizationLayer reluLayer maxPooling2dLayer(2,'Stride',2) fullyConnectedLayer(10) softmaxLayer classificationLayer];
2. Specify Training Options
options = trainingOptions('sgdm', ... 'InitialLearnRate',0.01, ... 'MaxEpochs',4, ... 'Plots','training-progress');These are simple training options, and not necessarily intended to give the best results. In fact, trainingOptions only requires you to set the optimizer, and the rest can use default values.
3. Train the network
net = trainNetwork(XTrain,YTrain,layers,options);Simple enough! Now let's do the same thing in the extended framework. Extended Framework Example Same example, just using the extended framework, or "DLNetwork" as I'll refer to this approach moving forward. This is a modified version of the code. To follow along with the complete example, the full code is in the doc example.
Load dataThis is exactly the same, no need to show repeat code. Now we can show the differences between the simple approach and the DLNetwork approach: Let's compare each of the following steps side by side to see highlight the differences.
1. Define Network LayersLayers are almost the same: we just need add names for each of the layers. This is handled explicitly in the simple framework, but we're required to do a little more pre-work.
layers = [... imageInputLayer([28 28 1], 'Name', 'input','Mean',mean(Xtrain,4)) convolution2dLayer(5, 20, 'Name', 'conv1') reluLayer('Name', 'relu1') maxPooling2dLayer(2, 'Stride', 2, 'Name', 'pool1') fullyConnectedLayer(10, 'Name', 'fc') softmaxLayer('Name','softmax') ];Notice in the layers, there is no classification layer anymore. This will be handled in the training loop, since this is what we want to customize. Then convert the layers into a layerGraph, which makes them usable in a custom training loop. Also, specify the dlnet structure containing the network.
lgraph = layerGraph(layers); dlnet = dlnetwork(lgraph);A dlnetwork has properties such as layers and connections (which can handle Series or DAG networks) and also a place to store 'Learnables'. More on this later.
2. Specify Training OptionsYou'll notice quite a few more non-optional parameters explicitly defined: these are parameters you will use in the custom training loop. Also, we no longer have the option of a pretty training plot like in the basic framework.
miniBatchSize = 128; numEpochs = 30; numObservations = numel(YTrain); numIterationsPerEpoch = floor(numObservations./miniBatchSize); initialLearnRate = 0.01; momentum = 0.9; executionEnvironment = "auto"; vel = ;You are now responsible for your own visualization, but this also means you could create your own visualizations throughout training, and customize to your liking to show anything about the network that would help to understand the network as it trains. For now, let's setup a plot to display the loss/error as the network trains.
plots = "training-progress"; if plots == "training-progress" figure lineLossTrain = animatedline; xlabel("Total Iterations") ylabel("Loss") end
Train network using custom training loopBasics you need to know before going into the training loop:
- An Epoch is one iteration through the entire dataset. So if you have 10 epochs, you are running through all files 10 times.
- A Mini-batch is a smaller chunk of the dataset. Datasets are often too big to fit in memory or on a GPU at the same time, so we process the data in batches.
for epoch = 1:numEpochs ... for ii = 1:numIterationsPerEpoch % *Setup: read data, convert to dlarray, pass to GPU ... % Evaluate the model gradients and loss [gradients, loss] = dlfeval(@modelGradients, dlnet, dlX, Y); % Update custom learn rate learnRate = initialLearnRate/(1 + decay*iteration); % Update network parameters using SGDM optimizer [dlnet.Learnables, vel] = sgdmupdate(dlnet.Learnables, gradients, vel, learnRate, momentum); % Update training plot ... end endFor completeness, you create the function modelGradients where you define the gradients and loss function. More on the specifics of this in the next post.
function [gradients, loss] = modelGradients(dlnet, dlX, Y) dlYPred = forward(dlnet, dlX); loss = crossentropy(dlYPred, Y); gradients = dlgradient(loss, dlnet.Learnables); endIn the simple example, one function trainnetwork has expanded into a series of loops and code. We're doing this so we have more flexibility when networks require it, and we can revert back to the simpler method when it's overkill. The good news is, this is as complicated as it gets: Once you understand this structure, it's all about putting the right information into it! For those that want to visualize what's happening in the loop, I see it like this: And as you may have guessed based on what's highlighted in the visualization above, the next post in this series will go into more detail on the inner workings of the loop, and what you need to know to understand what's happening with loss, gradients, learning rate, and updating network parameters. Three model approaches One final point to keep in mind, while I used the extended framework with the DLNetwork approach, there is also a Model Function approach to use when you also want control of initializing and explicitly defining the network weights and biases. The example can also use the model function approach and you can follow along with this doc example to learn more. This approach gives you the most control of the 3 approaches, but is also the most complex. The entire landscape looks like this: That's it for this post. It was a lot of information, but hopefully you found something informative within it. If you have any questions or clarifications, please leave a comment below!
コメントを残すには、ここ をクリックして MathWorks アカウントにサインインするか新しい MathWorks アカウントを作成します。