Steve on Image Processing with MATLABImage processing concepts, algorithms, and MATLAB

Note

Steve on Image Processing with MATLAB has been archived and will not be updated.

Image overlays

Note

Image Overlay

In response my post on "Tracing George", blog reader Riccardo asked me how to overlay the thinned binary image on top of the original image, using a different color. That is, given George:

url = 'https://blogs.mathworks.com/images/steve/36/george.jpg';
imshow(I)

and thinned George, using the method given in my previous post:

threshold = graythresh(I);
bw = im2bw(I, threshold);
bw2 = ~bw;
bw3 = bwmorph(bw2, 'thin', inf);

imshow(bw3)

how do you produce a color overlay like this:

Procedure

We want to produce an RGB (truecolor) image. Everywhere the binary image mask is zero, it should look like the original image. Everywhere the binary image mask is nonzero, it should have the specified color.

Start by making three copies of the original image, one for each channel of the desired RGB image.

out_red   = I;
out_green = I;
out_blue  = I;

Second, replace the masked pixels in each channel image with the desired color value.

out_red(bw3)   = 255;   % Class of out_red is uint8, so use 255 instead of 1.
out_green(bw3) = 255;
out_blue(bw3)  = 0;

Finally, concatenate the channel images along the third dimension to produce the desired overlay image.

out = cat(3, out_red, out_green, out_blue);
imshow(out)

File Exchange - imoverlay.m

I've often thought that this image overlay operation would be a good utility for the MATLAB File Exchange. Riccardo's question finally pushed me to write and submit imoverlay.m. I hope some of you find it useful.

help imoverlay
 IMOVERLAY Create a mask-based image overlay.
OUT = IMOVERLAY(IN, MASK, COLOR) takes an input image, IN, and a binary
image, MASK, and produces an output image whose pixels in the MASK
locations have the specified COLOR.

IN should be a grayscale or an RGB image of class uint8, uint16, int16,
logical, double, or single.

MASK should be a two-dimensional logical matrix.

COLOR should be a 1-by-3 vector of values in the range [0, 1].  [0 0 0]
is black, and [1 1 1] is white.

OUT is a uint8 RGB image.

Example
-------
Overlay edge detection result in green over the original image.

bw = edge(I, 'canny');
rgb = imoverlay(I, bw, [0 1 0]);
imshow(rgb)



Published with MATLAB® 7.2

|

댓글

댓글을 남기려면 링크 를 클릭하여 MathWorks 계정에 로그인하거나 계정을 새로 만드십시오.