This week's guest bloggers Ankit Desai and Vinod Cherian work on various aspects of using MATLAB to control instruments, make measurements with hardware, retrieve data from instruments, and do custom analysis in MATLAB. In this post they talk about transferring data between two separate MATLAB sessions using TCP/IP client-servers.
There are many cases where an operation needs to be performed in one MATLAB session and the data needs to be transferred to a different machine for further analysis and visualization in MATLAB. Many of you have asked about transferring MATLAB arrays between two MATLAB sessions on MATLAB Answers, the MATLAB newsgroup, and through technical support.
To show you an example of how this may be accomplished we've written an example that transfers the array of data required to create an L-shaped membrane. The script uses the tcpip function in Instrument Control Toolbox. Specifically it uses the new NetworkRole property, which is a new property of tcpip objects in R2011a.
The example consists of two parts:
- A MATLAB session on a server that needs to transfer its data out
- A second MATLAB session on a client computer that retrieves and plots the data
The MATLAB server session creates a data set to be transferred out, opens a TCP/IP server socket and waits for the client to connect to it. When the connection is established, the data is written out to the socket.
Prepare the data we want to send over to the client MATLAB session. In this case our data is created by a call to the membrane function.
data = membrane(1);
Let us list details of the data set we want to transfer. We will use this information later to set up some parameters on the server socket and in the client.
s = whos('data')
s = name: 'data' size: [31 31] bytes: 7688 class: 'double' global: 0 sparse: 0 complex: 0 nesting: [1x1 struct] persistent: 0
Get the dimensions of the data array we will be transferring.
ans = 31 31
Get the number of bytes of data we will be transferring.
ans = 7688
Start a TCP/IP server socket in MATLAB. By setting the IP address to '0.0.0.0' the server socket will accept connections on the specified port (arbitrarily chosen to be 55000 in our case) from any IP address. You can restrict the TCP/IP server socket to only accept incoming connections from a specific IP address by explicitly specifying the IP address. Note the new property NetworkRole.
tcpipServer = tcpip('0.0.0.0',55000,'NetworkRole','Server');
Set the OutputBufferSize property to a value large enough to hold the data. This is the first place where we use the output of the whos function, specifically the value of s.bytes.
Open the server socket and wait indefinitely for a connection. This line will cause MATLAB to wait until an incoming connection is established.
Since the MATLAB server code is running in a separate MATLAB session than the client, you may notice the Busy status next to the MATLAB Start Button in the server session until the following commands have been executed. You may stop the MATLAB server socket creation and break out of this busy state by using the Control-C key combination to close the server socket. Note that once you close the server socket clients will no longer be able to connect to it until it has been re-opened.
Once the connection is made by the client, write the data out and close the server.
The MATLAB server session is running on a computer with a known IP address or hostname. In our case, this is the address '127.0.0.1'. The second MATLAB session that acts as the client application creates a TCP/IP client, connects to the server and retrieves the data. Once retrieved, the data will be visualized in the client session.
Create a MATLAB client connection to our MATLAB server socket. Note the value of the NetworkRole property on the client. Also note that the port number of the client matches that selected for the server.
tcpipClient = tcpip('127.0.0.1',55000,'NetworkRole','Client')
TCPIP Object : TCPIP-127.0.0.1 Communication Settings RemotePort: 55000 RemoteHost: 127.0.0.1 Terminator: 'LF' NetworkRole: client Communication State Status: closed RecordStatus: off Read/Write State TransferStatus: idle BytesAvailable: 0 ValuesReceived: 0 ValuesSent: 0
Set the InputBufferSize property so we have sufficient room to hold the data that will be sent to us by the server. The number 7688 is the number of bytes in the data array. For more general purpose code, you can parametrize this code by using the value in s.bytes instead of the hard-coded value of 7688.
I will define a long value for the Timeout; the waiting time for any read or write operation to complete. Adjust this value to ensure that any data that is being transferred to the client will be read back within the selected timeout.
Open a TCPIP connection to the server.
Read the data that is being written out on the server. Note that the data types need to be matched up on the client and server. The number of double values to be read back from the server socket is 961. For more general purpose code, you may parametrize the second argument using prod(s.size), for example.
rawData = fread(tcpipClient,961,'double');
Close the connection to the server once we've retrieved the data.
Reshape the data array and plot it. You can parametrize this by specifying s.size as the input to reshape instead of the hard-coded array size (31x31).
reshapedData = reshape(rawData,31,31); surf(reshapedData);
Note that this functionality is meant to be used behind a firewall or on a private network, and should be used in accordance with the license agreement as it relates to your particular license option and activation type. For more information on using MATLAB TCP/IP server sockets refer to the documentation.
We could see a number of uses of this functionality; an example being using MATLAB on an instrument used to gather data. Using TCP/IP server sockets in MATLAB it is now possible to transfer the data out, without the need for files, to a remote computer for further analysis and visualization in MATLAB.
How do you see this functionality being used? Post your responses here.
댓글을 남기려면 링크 를 클릭하여 MathWorks 계정에 로그인하거나 계정을 새로 만드십시오.