File Exchange Pick of the Week

Our best user submissions

CAD APPS

Sean's pick this week is CAD APPS by Larry Silverberg.

For this week's pick I'm going to combine my grad school life in structural engineering with the two recent major snow storms we've had in New England over the last few weeks. My house has seen about 42 inches of snow. So let's make a quick model of the snow load on my back deck.

I'm going to model this as a Frame. Although it's not an ideal frame by any means, the snow load is distributed on it and not just applied at the ends.

Larry's app allows me to draw the deck interactively (in meters, feet would be nice!)

First I needed to adjust the axes limits:

Next I need to draw the structure. There needs to be a node everywhere I apply a load because there doesn't seem to be a distributed load option. The deck is about 12ft wide with a 3ft cantilever resting about 8ft off the ground.

Then the hard part, figuring out what the load is in terms of Newtons per meter of deck. Being lazy, I only shoveled the outer half of the deck where it was easy to throw the snow off.

psf = 10; % Assume 10 pounds/square foot (lbf/ft^2)
width = 2; % 24 inches on center joists = 2ft (ft)
ftPerMeter = 3.28; % Feet per meter (ft/m)
newtonsPerPound = 0.2248; % (N/m)
weightPerMeter = width.*psf.*3.28.*newtonsPerPound; % ft*lbf/ft^2*ft/m*N/lbf = N/m
disp(weightPerMeter)
   14.7469

And now we simulate and look at the results!

  • Max Shear:

  • Max Bending Moment:

My wood structural design books are somewhere in my attic at home so I have no idea what percentage of capacity the current snow load is using. But with another 6:10in of snow coming Monday, I probably oughtta clear off the rest of it. Sigh.

Comments

Give it a try and let us know what you think here or leave a comment for Larry.




Published with MATLAB® R2015a

|
  • print

评论

要发表评论,请点击 此处 登录到您的 MathWorks 帐户或创建一个新帐户。