Posts 71 - 80 of 183

Video Introduction to ThingSpeak and the Internet of Things

저자 Hans Scharler, September 25, 2015

Our very own Robert Mawrey produced a video introducing ThingSpeak and the Internet of Things.

ThingSpeak is an open data platform for the Internet of Things. Your device or application can… 더 읽어보기 >>

タグ:: internet of things,; MathWorks,; MATLAB,; video

Counting Cars and Analyzing Traffic 3

저자 Hans Scharler, September 18, 2015

The power of any tool becomes magnified when you start combing it with other tools. In this File Exchange project by Eric Wetjen, he demonstrates a powerful project by using a webcam to gather live… 더 읽어보기 >>

タグ:: counting,; internet of things,; iot,; MATLAB,; raspberry pi,; raspberrypi,; Simulink,; traffic

Updates to the MATLAB Analysis App with Lots of Example Code 3

저자 Hans Scharler, September 9, 2015

When using the MATLAB Analysis app on ThingSpeak, the MATLAB function to represent date and time (datetime) allows you to represent points in time. You can also use datetime(‘now’), … 더 읽어보기 >>

タグ:: data analytics,; internet of things,; MATLAB,; Open Data

Analyzing CheerLights with MATLAB

저자 Hans Scharler, September 4, 2015

CheerLights is an Internet of Things project created by Hans Scharler that allows people’s lights all across the world to synchronize to one color set by Twitter. This is a way to connect… 더 읽어보기 >>

タグ:: CheerLights,; internet of things,; MATLAB,; TweetControl,; Twitter,; web of things

You’ve Collected Lots of IoT Data, Now We Can Help You Figure Out What It Means! 2

저자 Hans Scharler, August 20, 2015

For the last several years, I have been collecting data with ThingSpeak from devices all around my house. I have been tracking temperature, humidity, light levels, outside weather data, my deep… 더 읽어보기 >>

タグ:: arduino,; data analytics,; Data Visualizations,; dew point,; internet of things,; MATLAB,; raspberry pi,; raspberrypi

[Kickstarter] nodeIT – Small, Stackable IoT Device

저자 Hans Scharler, August 18, 2015

Kickstarter projects pop up all of the time. Developers are looking to raise money for their projects so they can order a larger production run and gauge market reaction. A lot of recent projects are… 더 읽어보기 >>

タグ:: ESP8266,; internet of things,; Kickstarter,; sensors

Collecting Dust Levels with ThingSpeak and ESP8266 Wi-Fi 2

저자 Hans Scharler, August 7, 2015

Using the ESP8266 Wi-Fi module, [shadowandy] built a dust sensor to measure dust levels in his house. The project incorporates the Shinyei PPD42NS dust sensor to do the measurements and posts the… 더 읽어보기 >>

タグ:: arduino,; dust,; ESP8266,; GitHub,; internet of things,; sensors

Soldering Iron Connected to ThingSpeak with #NodeMCU and #ESP8266 Wi-Fi

저자 Hans Scharler, July 24, 2015

[Vegard Paulsen] created a solder iron that reports its usage and temperature to ThingSpeak and alerts him when it was left on. He uses an NodeMCU / ESP8266 Wi-Fi module to collect the data and post… 더 읽어보기 >>

タグ:: ESP8266,; internet of things,; iot,; NodeMCU,; sensors,; Twitter,; web of things

Basement Dehumidifier Tweets Its Humidity with ThingSpeak and ESP8266 Wi-Fi

저자 Hans Scharler, July 15, 2015

ThingSpeak user, Spencer, adapted a humidifier that sits in his basement. He is solving a common issue about humid basements. If your dehumidifier fails, you get wet things you have stored and then… 더 읽어보기 >>

タグ:: ESP8266,; humidity,; internet of things,; sensors,; Twitter

We are Growing Quickly… Want a Better IoT UX?

저자 Hans Scharler, May 1, 2015

We are growing so quickly and adding a ton of new functionality that we don’t want to lose the User Experience (UX). We want you to be able to build Internet of Things projects in 5 minutes and… 더 읽어보기 >>