In Simulink R2011a, it is possible to pass asynchronous function-call signals through Inports of a model. This enables the asynchronous function call to cross the boundary of Model block. Such... 더 읽어보기 >>
Guy on SimulinkSimulink & Model-Based Design
다음에 대한 결과: Model-Based Design
If you can put a man on the moon, can you take a look at my car? 25
Today I welcome my colleague Paul Barnard to guest post about the final report from the NHTSA-NASA Study of Unintended Acceleration in Toyota Vehicles. By Paul Barnard I just read the final... 더 읽어보기 >>
How to Verify Code Generated with Model-Based Design 4
An important benefit of Model-Based Design is doing early verification of your model and using what you learn to verify your final production software. As your design moves to production a critical... 더 읽어보기 >>
Creating Test Cases Using Signal Builder 20
By Parasar Kodati Every model needs to be tested, and all tests need inputs. For example control algorithms are typically tested with step or ramp inputs. An automotive suspension model test inputs... 더 읽어보기 >>
Kalman Filter – From MATLAB to Embedded C Code 9
By Guy Rouleau In a previous post, I introduced the Embedded MATLAB Function block. This block gives the possibility to write an algorithm in MATLAB code, include it in a Simulink model, and... 더 읽어보기 >>
Bus Signals: Past, Present and Future 4
By Guy Rouleau The first time I used buses in Simulink, it was version 3.0 (R11). Bus signals and the way we use them in Simulink have evolved over time. In this post I want to give you a... 더 읽어보기 >>
Model Explorer for Data Management and more 1
Update: Original videos have been removed form this blog post. To see similar content, please see this link: Improved Signal Management with Model Explorer By Parasar Kodati Working with models... 더 읽어보기 >>
Current Events: EcoCAR Fall Workshop 2
Today I saw a Chevy Volt in the MathWorks parking garage. MathWorks is hosting the EcoCAR Fall Workshop. An internal announcement states: More than 100 students representing 16 EcoCAR... 더 읽어보기 >>
How to Learn Model-Based Design using Simulink 4
When my colleague Guy saw my previous post about the MathWorks Academic Virtual Conference, he told me how he learned Model-Based Design and Simulink at l'Université de Sherbrooke. Here is what he... 더 읽어보기 >>
News from Embedded World 2010 6
In case you haven't been to a MathWorks conference or trade show recently, here is a look at what you might find at the MathWorks booth. In the following video, featured on Embedded-News.tv, my... 더 읽어보기 >>